
- latitudelongitude-to-pixel-coordinates
- 03-05-2007
![]() Re: latitude/longitude to pixel coordinates
| Dennis Pogson | 03-05-2007 |
If you were Registered and logged in, you could reply and use other advanced thread options
Hi,
I am using a Belgium map of size 844x598. I tried all the methods
mentioned in the forum to convert the latitude/longitude to pixel
coordinates, but it is not coming correct.
Can anyone help me?
Thanks
Saravana Kumar G.G
gnanapandithan.saravanakumar@gmail.com wrote:
Use the map calibration screen in Oziexplorer and your exact pixel co-ords
will be displayed in the top right corner of the screen.
On Mon, 05 Mar 2007 13:26:46 GMT, "Dennis Pogson"
>gnanapandithan.saravanakumar@gmail.com wrote:
>> Hi,
>> I am using a Belgium map of size 844x598. I tried all the methods
>> mentioned in the forum to convert the latitude/longitude to pixel
>> coordinates, but it is not coming correct.
>> Can anyone help me?
>> Thanks
>> Saravana Kumar G.G
>> I am using a Belgium map of size 844x598. I tried all the methods
>> mentioned in the forum to convert the latitude/longitude to pixel
>> coordinates, but it is not coming correct.
>> Can anyone help me?
>> Thanks
>> Saravana Kumar G.G
>Use the map calibration screen in Oziexplorer and your exact pixel co-ords
>will be displayed in the top right corner of the screen.
>will be displayed in the top right corner of the screen.
Thanks from a lurker. I'd never heard of Oziexplorer, and it does
just what I want to do.
gnanapandithan.saravanakumar@gmail.com wrote:
>
> I am using a Belgium map of size 844x598. I tried all the methods
> mentioned in the forum to convert the latitude/longitude to pixel
> coordinates, but it is not coming correct.
>
> Can anyone help me?
>
> I am using a Belgium map of size 844x598. I tried all the methods
> mentioned in the forum to convert the latitude/longitude to pixel
> coordinates, but it is not coming correct.
>
> Can anyone help me?
>
Here's a way to do it with geo referenced UTM coordinates.
http://edu-observatory.org/maps/utm_grid.html
On Mar 5, 5:00 am, gnanapandithan.saravanaku...@gmail.com wrote:
> Hi,
> I am using a Belgium map of size 844x598. I tried all the methods
> mentioned in the forum to convert the latitude/longitude to pixel
> coordinates, but it is not coming correct.
> Can anyone help me?
> Thanks
> Saravana Kumar G.G
> I am using a Belgium map of size 844x598. I tried all the methods
> mentioned in the forum to convert the latitude/longitude to pixel
> coordinates, but it is not coming correct.
> Can anyone help me?
> Thanks
> Saravana Kumar G.G
That sounds like very few pixels for a place the size of Belgium.
Perhaps a better map would be the way to solve this.
-- J.S.
- Convert to Latitude/Longitude from Eastings/Northings
- Geographic Information Systems (GIS)
- 2009-09-17
- Convert a shapefile with a French projection system to the common EPSG:4326 projection WGS84 (latitude, longitude)
- Geographic Information Systems (GIS)
- 2008-05-31
- Converting Lambert Projection Clarke1866 Coords to Latitude / Longitude
- Geographic Information Systems (GIS)
- 2006-01-28
- How to transfer latitude, longitude to GPS Garmin Device via VB Programming?
- Satellite Navigation
- 2006-03-26
- Dumb latitude/longitude question
- Garmin GPS
- 2007-11-26







> I am using a Belgium map of size 844x598. I tried all the methods
> mentioned in the forum to convert the latitude/longitude to pixel
> coordinates, but it is not coming correct.
> Can anyone help me?
> Thanks
> Saravana Kumar G.G