Page 1 of 2   1 2 > last >>
Bookmark this page: Add Looking for a GPS Antenna Switch to Yahoo MyWeb Add Looking for a GPS Antenna Switch to Google Bookmarks Add Looking for a GPS Antenna Switch to Windows Live Add Looking for a GPS Antenna Switch to Del.icio.us Digg Looking for a GPS Antenna Switch! Add Looking for a GPS Antenna Switch to Netscape
  •  
  • Subject
  • Author
  • Date
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Johnson on May 5, 2010, 4:55 pm


I would like to test two GPS antenna with one same GPS receiver. It is
really inconvenient to switch the antenna back and forth manually, since
my computer is not close to the test lab, and I can only run my software
in my computer, and the GPS receiver at the lab. I can't bring my
computer to the lab, or install my software to a test computer at the lab.

Is there any RF GPS Antenna awitch available, that I can switch the
antenna remotely from my computer? I wish there is a product that can
support 2 or more GPS inputs (from antenna), and one GPS output (to GPS
receiver), and a USB or Ethernet connection (to a test computer at lab)
to receive the commands from a remote computer.

Thanks.

Johnson


Posted by Alan Browne on May 5, 2010, 6:32 pm


On 10-05-05 16:55 , Johnson wrote:
> I would like to test two GPS antenna with one same GPS receiver. It is
> really inconvenient to switch the antenna back and forth manually, since
> my computer is not close to the test lab, and I can only run my software
> in my computer, and the GPS receiver at the lab. I can't bring my
> computer to the lab, or install my software to a test computer at the lab.
> Is there any RF GPS Antenna awitch available, that I can switch the
> antenna remotely from my computer? I wish there is a product that can
> support 2 or more GPS inputs (from antenna), and one GPS output (to GPS
> receiver), and a USB or Ethernet connection (to a test computer at lab)
> to receive the commands from a remote computer.

There are command-able RF switches. They are likely very expensive.

Search on 1.5 GHz switches


--
gmail originated posts are filtered due to spam.

Posted by Johnson on May 10, 2010, 12:22 pm


Alan Browne wrote:
> On 10-05-05 16:55 , Johnson wrote:
>> I would like to test two GPS antenna with one same GPS receiver. It is
>> really inconvenient to switch the antenna back and forth manually, since
>> my computer is not close to the test lab, and I can only run my software
>> in my computer, and the GPS receiver at the lab. I can't bring my
>> computer to the lab, or install my software to a test computer at the
>> lab.
>> Is there any RF GPS Antenna awitch available, that I can switch the
>> antenna remotely from my computer? I wish there is a product that can
>> support 2 or more GPS inputs (from antenna), and one GPS output (to GPS
>> receiver), and a USB or Ethernet connection (to a test computer at lab)
>> to receive the commands from a remote computer.
>
> There are command-able RF switches. They are likely very expensive.
>
> Search on 1.5 GHz switches
>
>
I haven't been able to find out a command-able RF switch yet. However, I
believe it is the way to go. Thanks!


Posted by samsvl on May 10, 2010, 4:43 am


> I would like to test two GPS antenna with one same GPS receiver. It is
> really inconvenient to switch the antenna back and forth manually, since
> my computer is not close to the test lab, and I can only run my software
> in my computer, and the GPS receiver at the lab. I can't bring my
> computer to the lab, or install my software to a test computer at the lab=
.
> Is there any RF GPS Antenna awitch available, that I can switch the
> antenna remotely from my computer? I wish there is a product that can
> support 2 or more GPS inputs (from antenna), and one GPS output (to GPS
> receiver), and a USB or Ethernet connection (to a test computer at lab)
> to receive the commands from a remote computer.
> Thanks.
> Johnson

You would require an RF power divider, such as a Wilkinson splitter.
Very rude (but it works) splitter on my site at:
http://home-2.worldonline.nl/~samsvl/splitter.htm

Sam

Posted by Johnson on May 10, 2010, 12:22 pm


samsvl wrote:
>> I would like to test two GPS antenna with one same GPS receiver. It is
>> really inconvenient to switch the antenna back and forth manually, since
>> my computer is not close to the test lab, and I can only run my software
>> in my computer, and the GPS receiver at the lab. I can't bring my
>> computer to the lab, or install my software to a test computer at the lab.
>> Is there any RF GPS Antenna awitch available, that I can switch the
>> antenna remotely from my computer? I wish there is a product that can
>> support 2 or more GPS inputs (from antenna), and one GPS output (to GPS
>> receiver), and a USB or Ethernet connection (to a test computer at lab)
>> to receive the commands from a remote computer.
>> Thanks.
>> Johnson
>
> You would require an RF power divider, such as a Wilkinson splitter.
> Very rude (but it works) splitter on my site at:
> http://home-2.worldonline.nl/~samsvl/splitter.htm
>
> Sam
Isn't it cute? Thanks.


Page 1 of 2   1 2 > last >>