
- Deleting-waypoints-in-Nuvi-670
- 11-16-2007
![]() Re: Deleting waypoints in Nuvi 670
| Travel by GPS | 11-17-2007 |
![]() ![]() Re: Deleting waypoints in Nuvi 670
| Jack Yeazel | 11-19-2007 |
If you were Registered and logged in, you could reply and use other advanced thread options
Is there a way to delete groups of waypoints in the Nuvi 670 besides doing
one at a time? I don't see an appropriate file when I have it connected to
my PC.
"D G Stewart" wrote:
> Is there a way to delete groups of waypoints... when I have it connected to my
PC.
You should see a couple of GPs eXchange (.gpx) files. I'm guessing
the one you want is called current.gpx. You can edit this file as you
would normally with waypoint management software. I recommend you
first make a backup of this file, then do your editing. If you find
that when you save the file back to your nuvi and the old waypoints
are still there, you will may to delete all my favorites using the
menu on the device before saving the edited file back to it.
I hope this helps you!
Check out TourGuide content for your nuvi at
http://travelbygps.com/TourGuide.php
- Doug
Travel by GPS wrote:
>
> "D G Stewart" wrote:
> "D G Stewart" wrote:
> > Is there a way to delete groups of waypoints... when I have it connected to
my PC.
>
> You should see a couple of GPs eXchange (.gpx) files. I'm guessing
> the one you want is called current.gpx. You can edit this file as you
> would normally with waypoint management software.
> You should see a couple of GPs eXchange (.gpx) files. I'm guessing
> the one you want is called current.gpx. You can edit this file as you
> would normally with waypoint management software.
I have tried this -even deleted both .gpx files, and the
waypoints are still in the unit... Once you turn the unit
on, the Current.gpx file comes back... So the waypoints are
also stored somewhere else...
The only way I know to delete all the waypoints at once is
to put the unit into the Maintenance Mode...
MAINTENANCE MODE:
Step 1. Turn your Nuvi unit off, remove any SD cards from
the SD card slot and make sure that the unit is not plugged
into
any computer.
Step 2. Place a fingertip on the upper left hand corner of
the touch screen and keep it there while turning the unit
on, a
prompt should read " Do you really want to start in
maintenance mode?"
Step 3. Select the yes button.
Step 4. Enter your PIN if enabled.
Step 5. Main Maintenance Mode screen should have 4
selections:
System information
View Diagnostics
Clear User data
Clear Waypoints
Step 6. After some selections the unit should reboot and you
check to verify unit after rebooting.
--
Jack
Get general GPS information at:
http://www.gpsinformation.net/
- 76CSx -- Deleting Waypoints
- Garmin GPS
- 2007-04-24
- Best price on Nuvi 680?
- Garmin GPS
- 2008-04-30
- nuvi 1450LMT On/Off Switch
- Garmin GPS
- 2012-02-08





