
- suction-mount--ripped-cup-at-spring
- 10-21-2010
![]() ![]() Re: suction mount - ripped cup at spring
| Howard Beale | 10-22-2010 |
![]() ![]() ![]() Re: suction mount - ripped cup at spring
| Peter H. Coffin | 10-22-2010 |
![]() ![]() ![]() Re: suction mount - ripped cup at spring
| Peter H. Coffin | 10-23-2010 |
![]() ![]() ![]() ![]() Re: suction mount - ripped cup at spring
| Howard Beale | 10-22-2010 |
![]() ![]() Re: suction mount - ripped cup at spring
| Every Picture T... | 10-22-2010 |
![]() ![]() Re: suction mount - ripped cup at spring
| Peter H. Coffin | 10-23-2010 |
![]() ![]() ![]() Re: suction mount - ripped cup at spring
| Gene E. Bloch | 10-23-2010 |
![]() ![]() Re: suction mount - ripped cup at spring
| Howard Beale | 10-24-2010 |
![]() ![]() ![]() Re: suction mount - ripped cup at spring
| Howard Beale | 10-24-2010 |
![]() ![]() Re: suction mount - ripped cup at spring
| Gene E. Bloch | 10-22-2010 |
![]() ![]() Re: suction mount - ripped cup at spring
| Gene E. Bloch | 10-22-2010 |
If you were Registered and logged in, you could reply and use other advanced thread options
I've been driving my son's car with my old Garmin Nuvi 260.
For some reason, the suction cup was not attaching, or staying attached
to the windshield. I thought it was because the cup was stored in the
console,
and was slightly deformed and not able to create a reliable seal.
Well, after finally reviewing the cup, spring, lever, etc - looking for
clues...
I discovered that the rubber disk is ripped at the attachment point
to the round metal disc at the end of the spring area,
and therefore doesn't "pullup" totally when the lever is flipped.
I'm guessing my son un-does the GPS
and flips the lever and wrestles the mount from the window,
which has over time ripped the rubber disc attachment point....
I tend to flip the lever and pry the disc from the window.
Anyway - just ordered a new mount on eBay (says it's the real Garmin).
SO - has anyone else ripped their rubber disc from the mounting spring area
?
--
----------------------------------
"If everything seems to be going well,
you have obviously overlooked something." - Steven Wright
For some reason, the suction cup was not attaching, or staying attached
to the windshield. I thought it was because the cup was stored in the
console,
and was slightly deformed and not able to create a reliable seal.
Well, after finally reviewing the cup, spring, lever, etc - looking for
clues...
I discovered that the rubber disk is ripped at the attachment point
to the round metal disc at the end of the spring area,
and therefore doesn't "pullup" totally when the lever is flipped.
I'm guessing my son un-does the GPS
and flips the lever and wrestles the mount from the window,
which has over time ripped the rubber disc attachment point....
I tend to flip the lever and pry the disc from the window.
Anyway - just ordered a new mount on eBay (says it's the real Garmin).
SO - has anyone else ripped their rubber disc from the mounting spring area
?
--
----------------------------------
"If everything seems to be going well,
you have obviously overlooked something." - Steven Wright
On Thu, 21 Oct 2010 17:16:00 -0500, "ps56k"
My suction mount never left the box. Before I used the GPS for the
first time, I upgraded to the bean bag mount.
My suction mount never left the box. Before I used the GPS for the
first time, I upgraded to the bean bag mount.
On 10/21/10 7:08 PM, Cleaver wrote:
...thereby putting a pound-and-a-half projectile just below eye level 16
inches from your head in a vehicle going 60-70 mph on a public highway
where idiots drive...talking on their cellies and screwing with their GPSs
> On Thu, 21 Oct 2010 17:16:00 -0500, "ps56k"
>> I've been driving my son's car with my old Garmin Nuvi 260.
>> For some reason, the suction cup was not attaching, or staying attached
>> to the windshield. I thought it was because the cup was stored in the
>> console,
>> and was slightly deformed and not able to create a reliable seal.
>> Well, after finally reviewing the cup, spring, lever, etc - looking for
>> clues...
>> I discovered that the rubber disk is ripped at the attachment point
>> to the round metal disc at the end of the spring area,
>> and therefore doesn't "pullup" totally when the lever is flipped.
>> I'm guessing my son un-does the GPS
>> and flips the lever and wrestles the mount from the window,
>> which has over time ripped the rubber disc attachment point....
>> I tend to flip the lever and pry the disc from the window.
>> Anyway - just ordered a new mount on eBay (says it's the real Garmin).
>> SO - has anyone else ripped their rubber disc from the mounting spring area
>> ?
>> For some reason, the suction cup was not attaching, or staying attached
>> to the windshield. I thought it was because the cup was stored in the
>> console,
>> and was slightly deformed and not able to create a reliable seal.
>> Well, after finally reviewing the cup, spring, lever, etc - looking for
>> clues...
>> I discovered that the rubber disk is ripped at the attachment point
>> to the round metal disc at the end of the spring area,
>> and therefore doesn't "pullup" totally when the lever is flipped.
>> I'm guessing my son un-does the GPS
>> and flips the lever and wrestles the mount from the window,
>> which has over time ripped the rubber disc attachment point....
>> I tend to flip the lever and pry the disc from the window.
>> Anyway - just ordered a new mount on eBay (says it's the real Garmin).
>> SO - has anyone else ripped their rubber disc from the mounting spring area
>> ?
> My suction mount never left the box. Before I used the GPS for the
> first time, I upgraded to the bean bag mount.
> first time, I upgraded to the bean bag mount.
...thereby putting a pound-and-a-half projectile just below eye level 16
inches from your head in a vehicle going 60-70 mph on a public highway
where idiots drive...talking on their cellies and screwing with their GPSs
On Fri, 22 Oct 2010 08:14:08 -0400, Howard Beale wrote:
It's not BEHIND you, where it could continue moving at 60MPH when the
car stops at a concrete wall. It's in front of you. Where it might fly
into the windshield. But any impact that's at enough speed to cause it
to be "flying" rather than "sliding slowly" is also going to trigger
the front airbags, and when that happens, the GPS is going through the
windshield no matter what mount it's on.
Come up with a real reason. "I'm allergic to beans" maybe. Or "I don't
want to pay the extra $20".
--
Crowds want to beat, journalists deserve to be beaten. Where lies
the problem?
-- Lars Syrstad
> On 10/21/10 7:08 PM, Cleaver wrote:
>> My suction mount never left the box. Before I used the GPS for the
>> first time, I upgraded to the bean bag mount.
>> first time, I upgraded to the bean bag mount.
> ...thereby putting a pound-and-a-half projectile just below eye level 16
> inches from your head in a vehicle going 60-70 mph on a public highway
> where idiots drive...talking on their cellies and screwing with their GPSs
> inches from your head in a vehicle going 60-70 mph on a public highway
> where idiots drive...talking on their cellies and screwing with their GPSs
It's not BEHIND you, where it could continue moving at 60MPH when the
car stops at a concrete wall. It's in front of you. Where it might fly
into the windshield. But any impact that's at enough speed to cause it
to be "flying" rather than "sliding slowly" is also going to trigger
the front airbags, and when that happens, the GPS is going through the
windshield no matter what mount it's on.
Come up with a real reason. "I'm allergic to beans" maybe. Or "I don't
want to pay the extra $20".
--
Crowds want to beat, journalists deserve to be beaten. Where lies
the problem?
-- Lars Syrstad
> On Fri, 22 Oct 2010 08:14:08 -0400, Howard Beale wrote:
>> On 10/21/10 7:08 PM, Cleaver wrote:
>>> My suction mount never left the box. Before I used the GPS for the
>>> first time, I upgraded to the bean bag mount.
>>> first time, I upgraded to the bean bag mount.
>> ...thereby putting a pound-and-a-half projectile just below eye level 16
>> inches from your head in a vehicle going 60-70 mph on a public highway
>> where idiots drive...talking on their cellies and screwing with their
>> GPSs
>> inches from your head in a vehicle going 60-70 mph on a public highway
>> where idiots drive...talking on their cellies and screwing with their
>> GPSs
> It's not BEHIND you, where it could continue moving at 60MPH when the
> car stops at a concrete wall. It's in front of you. Where it might fly
> into the windshield. But any impact that's at enough speed to cause it
> to be "flying" rather than "sliding slowly" is also going to trigger
> the front airbags, and when that happens, the GPS is going through the
> windshield no matter what mount it's on.
> Come up with a real reason. "I'm allergic to beans" maybe. Or "I don't
> want to pay the extra $20".
> car stops at a concrete wall. It's in front of you. Where it might fly
> into the windshield. But any impact that's at enough speed to cause it
> to be "flying" rather than "sliding slowly" is also going to trigger
> the front airbags, and when that happens, the GPS is going through the
> windshield no matter what mount it's on.
> Come up with a real reason. "I'm allergic to beans" maybe. Or "I don't
> want to pay the extra $20".
Me, I have no objection to them other than I just don't like beanbag/dash
mounts. I keep my GPS up high on the windshield right next to the rearview
mirror.
- Garmin GPSMAP 60csx suction mount
- Garmin GPS
- 2007-05-29
- Suction Mount for 76csx
- Garmin GPS
- 2006-09-25
- Friction mount for TomTom XL 340S?
- Tomtom GPS
- 2010-01-07
- Tomtom bean bag mount
- UK GPS Discussions
- 2008-06-12
- Windshield Mount?
- Garmin GPS
- 2006-12-10
- Nuvi 660 mount
- Garmin GPS
- 2007-06-17









>For some reason, the suction cup was not attaching, or staying attached
>to the windshield. I thought it was because the cup was stored in the
>console,
>and was slightly deformed and not able to create a reliable seal.
>Well, after finally reviewing the cup, spring, lever, etc - looking for
>clues...
>I discovered that the rubber disk is ripped at the attachment point
>to the round metal disc at the end of the spring area,
>and therefore doesn't "pullup" totally when the lever is flipped.
>I'm guessing my son un-does the GPS
>and flips the lever and wrestles the mount from the window,
>which has over time ripped the rubber disc attachment point....
>I tend to flip the lever and pry the disc from the window.
>Anyway - just ordered a new mount on eBay (says it's the real Garmin).
>SO - has anyone else ripped their rubber disc from the mounting spring area
>?