Bookmark this page:
- garmin-GPSMAP-76csx--diagnostic-mode
- 02-26-2006
  Re: garmin GPSMAP 76csx - diagnostic mode
| Phil Wheeler | 02-26-2006 |
If you were Registered and logged in, you could reply and use other advanced thread options
Does anyone know the command to put the gpsmap 76csx in the diagnostic
mode? I know it is pressing the arrow keys on the startup of the
gpsmap76cs but not sure abut the csx. I haven't been successful so
far.
I'm trying to find how to see what magnetic declination is being used
for my area.
I'm also interested in seeing the temperature that I know the unit can
display in the diagnostic mode
Thansk ... Steve Egge
steveegge...at...comcast.net
Steve,
Just compare True North and Magnetic North in the Heading Setup
display.
------
Sigurd
N 59=B056' E 10=B042' (WGS 84)
Size and shape of the Earth (WGS 84)?
Garmin MapSource map sizes?
Garmin GPSmap 276C, GPS 12 MAP and GPS III (PLUS)?
See http://home.online.no/~sigurdhu
steve egge skrev:
steve egge wrote:
> Does anyone know the command to put the gpsmap 76csx in the diagnostic
> mode? I know it is pressing the arrow keys on the startup of the
> gpsmap76cs but not sure abut the csx. I haven't been successful so
> far.
>
> I'm trying to find how to see what magnetic declination is being used
> for my area.
>
> mode? I know it is pressing the arrow keys on the startup of the
> gpsmap76cs but not sure abut the csx. I haven't been successful so
> far.
>
> I'm trying to find how to see what magnetic declination is being used
> for my area.
>
Likely based on IFGF 2000 (or some other 2000 model)
- GPSMap 76CSx "find" using lat/lon?
- Garmin GPS
- 2011-05-30
- GPSMap 76CSx mounts?
- Garmin GPS
- 2010-05-19
- Point accuracy with Garmin 76csx
- Garmin GPS
- 2010-04-18
- Garmin GPSMAP 60CSx
- Garmin GPS
- 2010-10-03
> I'm trying to find how to see what magnetic declination is being used for
> my area.
>=20
<snip>
>=20
> Thanks ... Steve Egge=20
> steveegge...at...comcast.net