Bookmark this page:
- MapSource-Idiocy
- 06-26-2011
   Re: MapSource Idiocy
| Rudolpho | 06-27-2011 |
 Re: MapSource Idiocy
| Peter H. Coffin | 06-28-2011 |
  Re: MapSource Idiocy
| Gene E. Bloch | 06-26-2011 |
  Re: MapSource Idiocy
| Gene E. Bloch | 06-30-2011 |
If you were Registered and logged in, you could reply and use other advanced thread options
I have Mapsource 6.16.3 and am having some problems. With the 20102.1 map
version, I can see a street on the map, including its address when I hover
the mouse pointer along the street.
In one case, I can't see the street at all in the "Find" street list, and in
the other I can select it, but when I try to actually find the location I
get "The selected street is not valid in this map product..."
Any ideas as to what is going on here??
What really gets me is that I can successfully find both locations with the
same map on my Nuvi 780.
version, I can see a street on the map, including its address when I hover
the mouse pointer along the street.
In one case, I can't see the street at all in the "Find" street list, and in
the other I can select it, but when I try to actually find the location I
get "The selected street is not valid in this map product..."
Any ideas as to what is going on here??
What really gets me is that I can successfully find both locations with the
same map on my Nuvi 780.
I have Mapsource 6.16.3 and am having some problems. With the 20102.1 map
version, I can see a street on the map, including its address when I hover
the mouse pointer along the street.
In one case, I can't see the street at all in the "Find" street list, and in
the other I can select it, but when I try to actually find the location I
get "The selected street is not valid in this map product..."
Any ideas as to what is going on here??
What really gets me is that I can successfully find both locations with the
same map on my Nuvi 780.
version, I can see a street on the map, including its address when I hover
the mouse pointer along the street.
In one case, I can't see the street at all in the "Find" street list, and in
the other I can select it, but when I try to actually find the location I
get "The selected street is not valid in this map product..."
Any ideas as to what is going on here??
What really gets me is that I can successfully find both locations with the
same map on my Nuvi 780.
Op 27-6-2011 3:08, Artiew schreef:
Try OpenStreetMap
http://www.openstreetmap.org/
--
Groetjes,
Rudolpho
Carpe diem
Try OpenStreetMap
http://www.openstreetmap.org/
--
Groetjes,
Rudolpho
Carpe diem
On Sun, 26 Jun 2011 18:08:58 -0700, Artiew wrote:
It's been a while since I've played with MapSource... Does it allow
the display of multiple map layers? Which map layer does the searching
happen on? All or just a selected one?
--
CANNIBAL, n.
A gastronome of the old school who preserves the simple tastes and
adheres to the natural diet of the pre-pork period.
> I have Mapsource 6.16.3 and am having some problems. With the 20102.1
> map version, I can see a street on the map, including its address when
> I hover the mouse pointer along the street.
> In one case, I can't see the street at all in the "Find" street list,
> and in the other I can select it, but when I try to actually find
> the location I get "The selected street is not valid in this map
> product..."
> Any ideas as to what is going on here??
> What really gets me is that I can successfully find both locations
> with the same map on my Nuvi 780.
> map version, I can see a street on the map, including its address when
> I hover the mouse pointer along the street.
> In one case, I can't see the street at all in the "Find" street list,
> and in the other I can select it, but when I try to actually find
> the location I get "The selected street is not valid in this map
> product..."
> Any ideas as to what is going on here??
> What really gets me is that I can successfully find both locations
> with the same map on my Nuvi 780.
It's been a while since I've played with MapSource... Does it allow
the display of multiple map layers? Which map layer does the searching
happen on? All or just a selected one?
--
CANNIBAL, n.
A gastronome of the old school who preserves the simple tastes and
adheres to the natural diet of the pre-pork period.
On Sun, 26 Jun 2011 18:07:53 -0700, Artiew wrote:
When you downloaded the new version, did you download it to both the
computer and the GPS device? Sounds to me like you downloaded it only to
the GPS.
I recently went back to the Garmin site when I got a new computer and
Garmin remembered me and allowed me to download the map to the new
computer, so I'd guess you could accomplish that as well.
--
Gene E. Bloch (Stumbling Bloch)
> I have Mapsource 6.16.3 and am having some problems. With the 20102.1 map
> version, I can see a street on the map, including its address when I hover
> the mouse pointer along the street.
>
> In one case, I can't see the street at all in the "Find" street list, and in
> the other I can select it, but when I try to actually find the location I
> get "The selected street is not valid in this map product..."
>
> Any ideas as to what is going on here??
>
> What really gets me is that I can successfully find both locations with the
> same map on my Nuvi 780.
> version, I can see a street on the map, including its address when I hover
> the mouse pointer along the street.
>
> In one case, I can't see the street at all in the "Find" street list, and in
> the other I can select it, but when I try to actually find the location I
> get "The selected street is not valid in this map product..."
>
> Any ideas as to what is going on here??
>
> What really gets me is that I can successfully find both locations with the
> same map on my Nuvi 780.
When you downloaded the new version, did you download it to both the
computer and the GPS device? Sounds to me like you downloaded it only to
the GPS.
I recently went back to the Garmin site when I got a new computer and
Garmin remembered me and allowed me to download the map to the new
computer, so I'd guess you could accomplish that as well.
--
Gene E. Bloch (Stumbling Bloch)
- MapSource V6.5 with nRoute
- Garmin GPS
- 2012-04-05
- Basecamp V Mapsource
- Garmin GPS
- 2012-03-07
- MapSource versus BaseCamp
- Garmin GPS
- 2012-01-01
- Mapsource on linux?
- Garmin GPS
- 2012-03-22
- Novice help please - Mapsource
- Garmin GPS
- 2011-12-16
- Help Mapsource
- Garmin GPS
- 2011-10-30
- problem with mapsource on a netbook?
- Garmin GPS
- 2011-07-07
- MapSource
- Garmin GPS
- 2011-05-25
- MapSource and automotive GPSRs?
- Garmin GPS
- 2011-03-28
> version, I can see a street on the map, including its address when I hover
> the mouse pointer along the street.
> In one case, I can't see the street at all in the "Find" street list, and in
> the other I can select it, but when I try to actually find the location I
> get "The selected street is not valid in this map product..."
> Any ideas as to what is going on here??
> What really gets me is that I can successfully find both locations with the
> same map on my Nuvi 780.