Bookmark this page:
- Garmin-Forerunner-305-query
- 09-29-2011
  Re: Garmin Forerunner 305 query
| Craig Wallace | 09-29-2011 |
   Re: Garmin Forerunner 305 query
| Tim Downie | 09-29-2011 |
If you were Registered and logged in, you could reply and use other advanced thread options
I realise that this might stimulate a "RTFM" reply but I've tried and I'm
darned if I can work out what I'm doing wrong.
Basically, unless I connect up my gamin to my PC after every run, the
distance of my last run gets tagged on to the distance of my new run. I
*am* pressing "Start/Stop" after my runs, not "Lap" and it make no
difference if I turn it off.
For example, if I did a 5 mile run yesterday, the mileage won't zero and
today's run will start with 5 miles on the clock unless I've uploaded my
run. This is more than a bit annoying. Have I got a faulty Gamin or have I
missed a simple way of zeroing the distance counter?
Tim
darned if I can work out what I'm doing wrong.
Basically, unless I connect up my gamin to my PC after every run, the
distance of my last run gets tagged on to the distance of my new run. I
*am* pressing "Start/Stop" after my runs, not "Lap" and it make no
difference if I turn it off.
For example, if I did a 5 mile run yesterday, the mileage won't zero and
today's run will start with 5 miles on the clock unless I've uploaded my
run. This is more than a bit annoying. Have I got a faulty Gamin or have I
missed a simple way of zeroing the distance counter?
Tim
On 29/09/2011 15:53, Tim Downie wrote:
At the end of the run, press the start/stop button to stop the timer.
Then hold down the lap/reset button for several seconds. That should
reset the distance and time.
At least that's how it works on my Forerunner 110, I assume the 305 is
similar.
--
Craig Wallace
http://craig.neogeo.org.uk
http://www.neogeo.org.uk
At the end of the run, press the start/stop button to stop the timer.
Then hold down the lap/reset button for several seconds. That should
reset the distance and time.
At least that's how it works on my Forerunner 110, I assume the 305 is
similar.
--
Craig Wallace
http://craig.neogeo.org.uk
http://www.neogeo.org.uk
Craig Wallace wrote:
Doh! Think I need my reading glasses. ;-) Never noticed the "reset" below
the lap button.
Ta muchly.
Tim
> On 29/09/2011 15:53, Tim Downie wrote:
>> I realise that this might stimulate a "RTFM" reply but I've tried
>> and I'm darned if I can work out what I'm doing wrong.
>> Basically, unless I connect up my gamin to my PC after every run, the
>> distance of my last run gets tagged on to the distance of my new
>> run. I *am* pressing "Start/Stop" after my runs, not "Lap" and it
>> make no difference if I turn it off.
>> For example, if I did a 5 mile run yesterday, the mileage won't zero
>> and today's run will start with 5 miles on the clock unless I've
>> uploaded my run. This is more than a bit annoying. Have I got a
>> faulty Gamin or have I missed a simple way of zeroing the distance
>> counter?
>> and I'm darned if I can work out what I'm doing wrong.
>> Basically, unless I connect up my gamin to my PC after every run, the
>> distance of my last run gets tagged on to the distance of my new
>> run. I *am* pressing "Start/Stop" after my runs, not "Lap" and it
>> make no difference if I turn it off.
>> For example, if I did a 5 mile run yesterday, the mileage won't zero
>> and today's run will start with 5 miles on the clock unless I've
>> uploaded my run. This is more than a bit annoying. Have I got a
>> faulty Gamin or have I missed a simple way of zeroing the distance
>> counter?
> At the end of the run, press the start/stop button to stop the timer.
> Then hold down the lap/reset button for several seconds. That should
> reset the distance and time.
> At least that's how it works on my Forerunner 110, I assume the 305 is
> similar.
> Then hold down the lap/reset button for several seconds. That should
> reset the distance and time.
> At least that's how it works on my Forerunner 110, I assume the 305 is
> similar.
Doh! Think I need my reading glasses. ;-) Never noticed the "reset" below
the lap button.
Ta muchly.
Tim
- Garmin Keygen version 1.3 by JetMouse
- Garmin GPS
- 2008-01-03
- Garmin ANT protocol
- Garmin GPS
- 2010-04-25
- Forerunner Group?
- Garmin GPS
- 2007-06-23
- Garmin Forerunner 201
- Garmin GPS
- 2005-09-12
> darned if I can work out what I'm doing wrong.
> Basically, unless I connect up my gamin to my PC after every run, the
> distance of my last run gets tagged on to the distance of my new run. I
> *am* pressing "Start/Stop" after my runs, not "Lap" and it make no
> difference if I turn it off.
> For example, if I did a 5 mile run yesterday, the mileage won't zero and
> today's run will start with 5 miles on the clock unless I've uploaded my
> run. This is more than a bit annoying. Have I got a faulty Gamin or have I
> missed a simple way of zeroing the distance counter?