Page 2 of 2   << first < 1 2
Bookmark this page: Add Deleting Route Section to Yahoo MyWeb Add Deleting Route Section to Google Bookmarks Add Deleting Route Section to Windows Live Add Deleting Route Section to Del.icio.us Digg Deleting Route Section! Add Deleting Route Section to Netscape
  •  
  • Subject
  • Author
  • Date
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by LightByrd on May 2, 2010, 5:44 pm


> Now I got it...
> On Sun, 2 May 2010 14:44:26 -0400, "LightByrd" wrote:
>>So if I create a route leg from "A" to "C" it shows up purple.
>>BUT A>B>C remains.
> Ok, so you DID create a new route instead of removing B from the old
> one. Point B way not be a waypoint, but it is a route point for sure.
> right-click it, it will show a menue allowing to delete it.
> Alternatively double klcik the route in the list, select the point in
> the text list, and delete from there.
> --
> Ciao,
> Holger (GUS-KOTAL, GUS#1100, GRR#51)
> 90-92 Honda CB400 10 Mm | 93-95 Yamaha TDM 850 26 Mm
> 95-97 KTM 620 LC4 13 Mm | seit 97 BMW R1100GS 69 Mm (Die Renndrecksau!)
> cu @ http://www.issle.de


Thank you for your help, Holger.
Unfortunately I can right click on the intersection which is point "B"
(the right angle of the triangle)
and no submenu appears with any sort of "delete" option.
The route properties window also does not show that point
I am assuming this is because I originally allowed MapSource to create its
own route between 2 user defined waypoints and it chose to go through point
"B"

I just get annoyed that deleting a route leg and replacing it with another
is not intuitive, as is the case with most other programs.
In other words... have a submenu option when a route is selected to define 2
points by clicking on them and then having "delete this leg" as an option.

Or is that just too easy??!!
Thanks again
--
Regards,
Richard Harison



Posted by LightByrd on May 3, 2010, 5:58 pm


> Now I got it...
> On Sun, 2 May 2010 14:44:26 -0400, "LightByrd" wrote:
>>So if I create a route leg from "A" to "C" it shows up purple.
>>BUT A>B>C remains.
> Ok, so you DID create a new route instead of removing B from the old
> one. Point B way not be a waypoint, but it is a route point for sure.
> right-click it, it will show a menue allowing to delete it.
> Alternatively double klcik the route in the list, select the point in
> the text list, and delete from there.
> --
> Ciao,
> Holger (GUS-KOTAL, GUS#1100, GRR#51)
> 90-92 Honda CB400 10 Mm | 93-95 Yamaha TDM 850 26 Mm
> 95-97 KTM 620 LC4 13 Mm | seit 97 BMW R1100GS 69 Mm (Die Renndrecksau!)
> cu @ http://www.issle.de


Hello Holger....
Thought you might want to know the latest!
Took Mark I's advice on another section of the route (see his post in this
thread)
and it worked perfectly. (It was a rectangle problem)

But when I looked again at the triangle problem, I noticed it had fixed
itself!!
Go figure!!

I still think Mapsource should be more intuitive about what people really do
with it!

--
Regards,
Richard Harison



Page 2 of 2   << first < 1 2